Space Marines vs Death Guard [FREE PACK]

Space Marines vs Death Guard

⚒️ This free pack is perfect for 3D printing beginners or enthusiasts looking to expand their army. It includes four figurines in separate pieces in STL format, optimized for resin printers, offering detailed and easy-to-assemble models.

📁 File Preparation:

After downloading the STL files, open them in a slicing software such as Chitubox (free). Position the models to minimize areas requiring supports and enable the automatic support generation option. Manually check the contact points to ensure they are placed in discreet areas and add a raft (skate) to facilitate the removal from the build plate after printing. Also, make sure no part of the models is unsupported to avoid printing errors.

🖨️ Printer Settings:

Export the files to your printer, setting the layer height to 0.05 mm for precise details. Adjust the standard exposure time to 3–5 seconds per layer, and increase it to 30–40 seconds for the initial layers to ensure proper adhesion to the build plate. (Check the specific recommendations on your resin’s packaging to fine-tune the exposure times if needed.)

🎨 Post-Processing:

After printing, remove the figurines using a flat metal spatula. Clean the prints in isopropyl alcohol (IPA), ideally using an ultrasonic cleaner for optimal results. Once cleaned, cure the figurines under a UV lamp or in a curing station for 2–5 minutes, depending on your resin's properties. Finally, assemble the pieces using resin glue, and apply a classic primer to prepare them for painting.